• In the Spotlight:
Join the Meeting Place for Moms!
Talk to other moms, share advice, and have fun!

(minimum 6 characters)

How to make a Memory board

Posted by on Jul. 28, 2009 at 1:24 PM
  • 0 Replies
  • 310 Total Views

 I am in the process of redoing my 7 year old daughters room and want to make 1 or 2 memory boards for her to display her dancing memorabilia, pic's etc.  Thought you might be interested in learning how to make them too! I'll post pic's when I'm done;)

You can buy beautiful memory boards at Crate and Barrel and the like for $80 and up. Why spend the money? This board is easy to make and gorgeous!

What You'll Need

  • 1 yard of quilt batting (low density is fine)
  • 1 yard of fabric of your choice (pick something that really reflects you, this is the soul of the memory board)
  • 1 large cork board with wood border
  • Staple gun
  • Scissors
  • Shiny ribbon of any length; non-wired is best. Ideally it should coordinate with the fabric.
  • Favorite photos!

Example

Wedding Memory Board

How to Make a Memory Board

  1. Lay the quilt batting over the cork board. Cut it down to fit just to the edge of the cork board.
  2. Lay the fabric smoothly over the quilt batting, making sure the patterned side is facing out (not touching the batting).
  3. Flip the board over so the fabric is laying flat on the table.
  4. Pick up the fabric and fold it over the left hand border of the cork board ONLY. Make sure it is even.
  5. Staple the fabric to the wood border of the cork board in an even line with the staple gun. Space the staples two to three inches apart.
  6. Go to the right hand border of the cork board and fold the fabric over it. This time, pull the fabric taut so it's stretched over the board, but not so hard it rips against the staples on the other side.
  7. Staple it down in a flat, even row, stretching the fabric taut as you staple, making sure the staples are going into the wood border.
  8. Repeat steps 4-7 for the top and bottom borders.
  9. Flip the board over and make sure that the fabric is smooth over the board. It should be pressing the batting down slightly so that you have a puffy, smooth surface.
  10. Trim the excess fabric from the back.
  11. Cut several lengths of ribbon that are several inches longer than the width of the board.
  12. Starting with the upper left corner, staple the ribbon to the back and draw it diagonally across the board, stapling it in the middle of the bottom. It should be quite taut against the fabric. (If too loose, the pictures will fall out!)
  13. Keeping the ribbon evenly spaced, do this across the board. When you reach the end, switch directions so the ribbon forms perfect diamonds over the fabric.
  14. Trim the ends of the ribbons.
  15. Weave your pictures through the ribbons. They should stay put with just the tension from the ribbon.

 

 

by on Jul. 28, 2009 at 1:24 PM
Add your quick reply below:
You must be a member to reply to this post.
Replies:
There are no replies to this post.
Join the Meeting Place for Moms!
Talk to other moms, share advice, and have fun!

(minimum 6 characters)